Drum flaker is a kind of rotating continuous drying equpment with internal heating and conducting. Certain thickness of materials film attaches the drum from materials tank at the under the bottom. Heat is transferred to the internal wall of the drum through pipes and then to the external wall and conduct to the materials film. So that it evaporates the moisture in the materials film so as to dry the materials. Dried products are scrapped off the drum by the blade fixed on the surface of the drum, then fall down to the spiral conveyor under the blade. The conveyor collects the products and output them.
Main Features
The drum flaker is including: frame support, electric motor, gear reducer, cooling drum,
scraper knife, thickness adjustor, feeding hopper, discharging hopper, stainless steel dedusting Cover etc.
Applied material for key parts and test standards
—— The parts of stearic acid in contact with soap material is 304 stainless steel,
Machine frame support made of carbon steel hot spray galvanized.
—— The drum and material trough of the flaker is manufactured and inspected as per the specification of Steel Vessel
in normal pressure, the machining, welding and assembling to be made according to the general condition of
JB/T4735.1-2009, JB/T 4735.2-2009,JB/T 47003.1-2009.
—— The drum will be done the water pressure test under 0.3MPA after finishing the manufacturing.
—— The data after assembling: radial runout of drum ≤0.1mm, axial transmission±0.2mm.
—— The contact between scraper and drum should be even, the contact line will be not less than 80% of the whole length. There should be no bumping and abnormal noise when running.
The outside shell of the drum should be treated by polishing.
Packing & Delivery
Nude packing and wooden case
Delivery within 50 working days
